4 Post Car Lift 8 500 lbs Capacity By Katool

3299,00 $

In stock

SKU: KT-4H850 Categories: , Brand:

Description

The KT-4H850 8,500 lbs 4 Post Car Lift is made for people who want more from their garage. It’s not just about lifting cars—it’s about safety, space, and making your work easier. With a solid 8,500 lbs capacity, this lift handles sedans, SUVs, and light trucks without breaking a sweat.

Unlike a 2-post, this 4 post garage car lift 8 500 lbs gives you a drive-on setup. That means no guessing, no tricky balancing—just roll up and lift. Four runways support the vehicle at all corners, so even if you’re new to car lifts, you’ll feel secure every time you use it.

Space is always tight in a garage, and this lift solves that. Park one car above the other and double your storage without building an addition. The posts are spaced so doors can still open on the car underneath, which is something 2-post lifts just don’t offer.

It’s also flexible. The power column can go on the front or rear, and with the included caster kit you can move the whole lift when you need to rework your layout. Add in drip trays and a jack tray, and you’ve got a system that’s as clean as it is practical.

Safety comes standard here. You get a single-point manual lock release, four mechanical safety locks, and a backup cable system that kicks in if anything fails. The runways are non-skid diamond plate, and the adjustable lock ladders let you set the height that works for you.

One last thing: don’t ignore your concrete. You’ll need at least 3.93″ (100 mm) thickness with 3000 PSI rating. That’s what keeps the lift stable and safe.

Bottom line? The 4 Post Car Lift 8 500 lbs is a tough, smart, and safe choice for anyone who wants more space, better access, and real peace of mind in their garage.

Features

  • 8500lbs lifting capacity.
  • CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested.
  • Single Point Manual Safety Lock Release
  • Four mechanical locking devices, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.
  • Power side column can be installed at both sides, front or rear.
  • Non-skid diamond platforms and adjustable safety lock ladders.
  • Comes with a caster kit for moving the lift around.
  • Comes with three drip trays and a jack tray.
  • High-quality hydraulic system with 110V/60HZ/1PH or 220V/60HZ/1PH (Optional)

Specifications

Lifting Capacity 8500 lbs. (3850KG )
Max. Lifting Height 70.87″ / 1800mm
Lifting Time 75s Up / 40s Down
Height of Posts 83.66″ / 2125mm
Width Overall 107.95″ / 2742mm
Length Overall 198.43″ / 5040mm (with Ramps)
Inside Column 94.72″ / 2406mm
Min. Runway Height 4.76″ / 121mm
Motor 110VAC/60HZ/1PH
Net Weight 1820lbs / 826KG

*Concrete thickness must be at least 3.93” (100 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation. 

Warranty

12 Months All Parts Warranty

The purchasers of Autokato products (Autto) are protected by the manufacturer’s warranty. Autokato offers a one-year warranty on all product parts, and three year’s warranty on product structure.

Free shipping on warranty parts. Labor is not included in warranty.

Shipping Policy

Please read carefully  

  • Freight shipping ONLY within the lower 48 states.
  • Free shipping to commercial addresses or freight terminals.
  • Residential address or limited access is charged by carrier extra cost. ($90)
  • This item is too heavy so the customer should consider a forklift to unload it.
  • Buyers should inspect delivered the products carefully before signing the Bill of Lading or Delivery Receipt at the time of delivery. Buyer satisfaction is assumed if no damages are noted on the delivery receipt.

Reviews

There are no reviews yet.

Be the first to review “4 Post Car Lift 8 500 lbs Capacity By Katool”

Your email address will not be published. Required fields are marked *